Fuel System Installation #4 (of 4)

Quick post to say that today I finished the fuel system installation. I was waiting on the wings to connect the vent, drain and feed lines of the aux tank.

Here's what I see now when I get in the hangar!

Had to make new lines since I changed the routing of both the vent and drain lines. This one is the bottom half of the drain line... Pretty long to bend to what I needed.

The clear tube sections on the above picture are leftovers from my fuel sight tube (1/4 ID Tygon) I used as anti-chafing for areas close to other parts. Always better to think about this before doing the flares : )

I should be ready soon to reinstall the fuse panels...